User Manual

ManualsBrandsVello ManualsPhoto AccessoriesShutterBoss II Timer Remote Switch for Canon with Sub Mini Connection

16

The low battery indicator will blink when

battery power is low. To change batteries:

1: Check that the TIMER ACTIVE and

RELEASE buttons are not active.

2: Turn o the camera and disconnect the

ShutterBoss.

3: Slide open the battery chamber cover on

the back of the ShutterBoss.

4: Remove the batteries.

5: Wait for the display to go out and install

two fresh 1.5V AAA alkaline batteries.

CHANGING THE BATTERIES

Low Battery Indicator

SELF LONG INTV No. BEEP