User Manual

10
The simplest way of using the ShutterBoss
is as a manual release. You can trigger your
camera by pressing the remote’s shutter
release button. This works even with the
remote’s power turned o.
1. Adjust your camera settings, such as
exposure mode, shutter speed, and
focus and shooting modes.
2. Press the remote’s shutter release
button halfway to focus.
Note: Autofocus is not compatible with
back-button focusing on some camera
models.
3. Press the shutter release button fully
to take a photo. If your camera is set
to bulb mode you can keep the button
pressed for longer exposures.
MANUAL RELEASE