PADDED HANDGRIP STRAP WITH ARCA-TYPE PLATE USER’S MANUAL PGS-P
THANK YOU FOR CHOOSING VELLO The Vello Hand Grip Strap assures you of a constant firm grip on your camera while you’re out shooting. The strap adjusts to your hand, and an extra security strap wraps around your wrist and lets the camera hang securely while you’re walking or moving around. You’ll always be prepared to capture the shot when you’re walking through the country or around the city because when the moment arrives, all you need to do is raise the camera to eye level and shoot.
SPECIFICATIONS Strap Length 6 in. (15.2 cm) Strap Width 2.25 in. (5.7 cm) Material Leather Zinc alloy Weight 3.4 oz.
OVERVIEW 1 H and strap 2 Top strap 3 Detachable security strap 4 Bottom strap 5 Arca-style baseplate 6 1/4-20 mounting screw 7 Eyelet release button 2 1 8 Eyelet 3 6 8 7 4 5
ATTACHING THE STRAP AND FITTING TO YOUR HAND 1. Screw the baseplate into the camera’s tripod socket so the eyelet doesn’t cover the battery compartment. 2. Thread the top strap up through the camera lug on the trigger side. 3. Thread the top strap through the loop and the buckle, and tuck the end of the strap into the pocket.
4. Put your hand through the strap. The strap should fit snugly around your hand. To tighten the strap around your hand, shorten the bottom strap. 5. Wrap the security strap around the inside of your wrist. 6. Adjust the strap’s length until it fits snugly around your wrist.
MOUNTING TO A TRIPOD OR HEAD The PGS-P can be mounted onto a tripod or head. 1. Loosen your tripod head’s Arca-style clamp, and insert the baseplate. 2. Support your camera with one hand while you balance the camera, and tighten the Arca clamp until secure. Important! If the eyelet is not flush against the bottom of the camera, it will not fit into the clamp. Press the eyelet release button, and fold it up against the camera’s base.
One-Year Limited Warranty This Vello product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
