ACCELERATOR LENS ADAPTER User Manual LAG-MFT-CEF Canon EF Lens to Micro Four Thirds Mount
THANK YOU FOR CHOOSING VELLO The Vello Accelerator Lens Adapter is for attaching Canon EF-mount lenses to Micro Four Thirds cameras. It allows a wider field of view on Micro Four Thirds sensors by magnifying the angle of view by 0.71×. This also provides an extra stop of light without decreasing image quality. For example, mounting a 50mm f/1.4 lens to a Micro Four Thirds sensor will usually give you a 100mm angle of view.
PRECAUTIONS • Avoid sandy or dusty environments when using this adapter. • Do not use solvents such as benzene, alcohol, or detergents to clean the adapter. • Please read and follow these instructions. Keep this manual in a safe place. • Handle the adapter with care. Avoid impacts and vibrations. • Keep this unit away from children. • All images are for illustrative purposes only. • Clean the adapter by wiping it with a soft, dry cloth. • Keep this unit away from water and flammable gases or liquids.
OVERVIEW Front Canon lens alignment dot Back Optical Elements USB port Canon lens mount Hex screws 4 Tripod foot Camera mount alignment dot Aperture toggle (Panasonic only) Lens Release Micro Four Thirds mount 1/4-20 tripod socket
CONTENTS • Vello LAG-MFT-CEF lens adapter for Canon EF Lenses to Micro Four Thirds Mount • Front and rear caps • Removable tripod foot • 2 mm hex key • Protective case • User manual 5
MOUNTING THE LENS ADAPTER Note: Place the lens and camera on a stable, flat surface when mounting or removing the Accelerator Lens Adapter. 1. Turn the camera’s power off, and remove all protective caps. 6 2. Line up the alignment dots on the lens adapter and the camera, and carefully insert the lens adapter into the camera’s lens mount. Rotate the Accelerator clockwise until it locks into place.
3. Line up the alignment dot on the lens with the alignment dot on the lens adapter, and carefully insert the lens. Rotate the lens clockwise until it locks into place.
APERTURE CONTROL (PANASONIC ONLY) The aperture control toggle allows you to quietly open and close the aperture without clicking a camera dial or rotating a lens ring. Since it minimizes camera vibrations and noise, you can use it to change aperture during video recording. 8 Press the toggle towards to close the aperture. Press the toggle towards to open the aperture.
REMOVING THE LENS ADAPTER 1. Turn the camera’s power off. 3. Reattach the front lens cap to the lens adapter. 2. Press and hold the release pin on the lens adapter, and carefully rotate the lens counterclockwise to detach it from the adapter. 4. Press and hold the lens release button on the camera, and carefully rotate the lens adapter counterclockwise to detach it from the camera. 5. Reattach the rear lens cap to the lens adapter.
REMOVING THE TRIPOD FOOT Use the included hex key to loosen the hex screws until the foot can be removed from the lens adapter. Note: If your lens has a built-in tripod collar, use the collar on the lens to mount the assembly to the tripod.
FIRMWARE UPDATE Go to vellogear.com to check for the latest available updates for your lens adapter. Use the USB port to connect the adapter to your computer, and follow the update instructions.
SPECIFICATIONS Compatible Lenses Canon EF Compatible Cameras Micro Four Thirds Optical Design 4 elements in 4 groups Step-Down Amount 1 f-stop Angle-of-View Multiplier 0.
Lens Mount Canon EF Camera Mount Micro Four Thirds Tripod Thread 1/4-20 Dimensions (H × W × D) 2.95 × 2.79 × 0.95 in. (7.5 × 7.1 × 2.4 cm) Weight 4.2 oz.
ONE-YEAR LIMITED WARRANTY This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
To obtain warranty coverage, contact the Vello Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Vello along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense. For more information or to arrange service, visit www.vellogear.com or call Customer Service at 212-594-2353. Product warranty provided by the Gradus Group. www.gradusgroup.
www.vellogear.