AUTO LENS ADAPTER User Manual LAE-MFT-FT Four Thirds Lens to Micro Four Thirds Mount
THANK YOU FOR CHOOSING VELLO The Vello Auto Lens Adapter is for attaching Four Thirds lenses to a Micro Four Thirds mount. It features autofocus and autoexposure functionality, and it delivers metadata for your pictures. The inside of the adapter is coated to reduce stray reflections and to maximize picture quality.
CONTENTS • Vello LAE-MFT-FT Lens Adapter for Four Thirds lens to Micro Four Thirds mount • Front and rear caps • User manual 3
PRECAUTIONS • Please read and follow these instructions, and keep this manual in a safe place. • Avoid sandy or dusty environments when using this adapter. 4 • Handle the adapter with care—don’t drop it, and avoid bumps and shocks. • Do not use solvents such as benzene, alcohol, or detergents to clean the adapter. • Clean the adapter by wiping it with a soft, dry cloth. • Be sure to read the operating instructions for your digital camera.
• Do not attempt to disassemble or repair the equipment— doing so will void the warranty, and Vello will not be responsible for any damage. • Keep this unit away from water and flammable gases or liquids. • All images are for illustrative purposes only. • Keep this unit away from children.
OVERVIEW Front Four Thirds lens alignment dot Four Thirds lens mount 6 Back Lens release Camera mount alignment dot Micro Four Thirds mount
MOUNTING THE LENS ADAPTER Note: Place the lens and camera on a flat, stable surface when mounting or removing the lens adapter. 3. Line up the alignment dots on the lens adapter and the camera. 1. Turn the camera’s power off. 4. Carefully insert the lens adapter into the camera, and rotate clockwise until it locks into place. 2. Remove all caps before mounting.
5. Line up the alignment dot on the lens with the alignment dot on the lens adapter. 6. Carefully insert the lens into the lens adapter, and rotate the lens clockwise until it locks into place. 8 7. Turn your camera on.
REMOVING THE LENS ADAPTER 1. Turn the camera’s power off. 2. Press and hold the release pin on the lens adapter. 3. Rotate the lens counterclockwise to release, and carefully detach the lens from the lens adapter.
4. Press and hold the lens release button on the camera. 5. Rotate the lens adapter counterclockwise to release, and carefully detach the lens adapter from the camera. 10 6. Reattach the front and rear caps to the lens adapter.
SPECIFICATIONS Compatible lenses Four Thirds mount Compatible cameras Micro Four Thirds mount Front mount Four Thirds Rear mount Micro Four Thirds Diameter 65 mm Depth 0.88 in. (22.5 mm) Weight 3.5 oz.
One-Year Limited Warranty This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
