AUTO LENS ADAPTER USER MANUAL LAE-CM-CEF Canon EF/EF-S Lens to Canon EOS-M Camera
INTRODUCTION Thank you for purchasing the Vello LAE-CM-CEF Auto Lens Adapter – Canon EF/EF-S Lens to Canon EOS-M Camera. This adapter allows you to mount any Canon EF or EF-S lens to a Canon EOS-M camera. With an EF or EF-S lens mounted to a Canon EOS-M camera using this adapter, all automatic functions, such as auto focus and auto exposure, are available and fully operational. A removable tripod mount collar with a ¼" socket is included.
CONTENTS INCLUDE • Vello LAE-CM-CEF Auto Lens Adapter - Canon EF/EF-S Lens to Canon EOS-M Camera • Front and rear caps • Removable tripod mount collar • User manual 3
INTRODUCTION The Vello Auto Lens Adapter – Canon EF/EF-S Lens to Canon EOS-M Camera can expand the arsenal of lenses for your Canon EOS-M camera using lenses you already own. With this adapter, you can mount any Canon EF or EF-S lens to a Canon EOS-M camera. Just attach the adapter to your EF or EF-S lens, then mount the lens and adapter to your Canon EOS-M camera.
When using an EF lens, there will be a crop factor of 1.6x, so that the apparent focal length of the lens will be 1.6x of the actual focal length. With EF-S lenses, there is no apparent change in the focal length. All camera functions will operate normally, including auto focus, auto exposure, and touch-screen modes. A removable tripod mount collar is included for use with longer lenses.
PRECAUTIONS • Mount the lens to the adapter in a dust-free environment. • Avoid sandy or dusty environments when using this adapter. • Handle the adapter with care— don’t drop it, and avoid bumps and shocks. • Clean the adapter by wiping it with a soft, dry cloth. 6 • Do not use solvents such as benzene, alcohol, detergents, etc. to clean the adapter. • Be sure to read the operating instructions for your digital camera. • Keep this unit away from water and flammable gases or liquids.
• Do not attempt to disassemble or repair the equipment—doing so will void the warranty, and Vello will not be responsible for any damage. • All photos are for illustrative purposes only. • Please read and follow these instructions, and keep this manual in a safe place. • Handle the unit with care. • Keep this unit away from children. • Use only parts provided by the manufacturer.
OVERVIEW 1 EF/EF-S lens mount 2 EF lens red dot indicator 3 EF-S lens white square indicator 4 Camera mount dot indicator 5 Lens release button 6 EOS-M camera mount 7 Tripod collar 8 Tripod collar release wheel 9 1/4" tripod socket 8 2 1 3 4 5
6 9 7 8 9
ATTACHING THE LENS ADAPTER 1. Turn the camera’s power off. 2. Remove the rear lens cap, camera body cap, and lens adapter caps. 3. With an EF lens, align the inner red dot on the lens adapter with the red dot on the lens. With an EF-S lens, align the white square on the lens adapter with the white square on the lens.
4. Slowly and carefully insert the lens into the adapter and carefully rotate it clockwise until it clicks into place.
5. Align the white mark on the lens adapter with the white lens attachment mark on the camera and slowly rotate the adapter and lens clockwise until it clicks into place on the camera. Note: In order to use auto focus with the camera, be sure that the lens is set to auto focus.
REMOVING THE LENS ADAPTER 1. Turn the camera’s power off. 2. Hold down the lens release button on the camera and rotate the lens and adapter counterclockwise until they come to a stop. Remove from the camera.
3. Hold down the release button on the adapter mount, and remove the lens by rotating it counterclockwise until it comes to a stop. 4. Separate the lens from the adapter mount. 5. Replace the rear lens cap, camera body cap, and lens adapter caps.
MOUNTING / REMOVING THE TRIPOD COLLAR 1. Align the tripod collar mounting screw with the mounting hole on the bottom of the lens adapter.
2. Carefully rotate the mounting wheel on the tripod collar clockwise until the tripod collar is securely attached to the lens adapter.
3. To remove the tripod collar, rotate the mounting wheel counterclockwise until the collar is loose enough to remove from the lens adapter. Note: When attaching a lens that’s equipped with a built-in tripod collar to the lens adapter, use the tripod collar on the lens to mount it to a tripod.
COMPATIBILITY Lenses that are compatible with the Vello Auto Lens Adapter – Canon EF/EF-S Lens to Canon EOS-M Camera.
SPECIFICATIONS • Dimensions – 2.6” diameter × 0.8” length (65 × 19.5 mm) • Weight – 2.9 oz.
One-Year Limited Warranty This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
