User Manual

24
. Set the camera to Bulb mode.
2. Attach the appropriate shutter release
cable to the shutter release [ ] port on
the Receiver and to the camera.
3. Mount the Receiver to the camera’s hot
shoe.
4. Set the Function Switch on the Receiver
to “Camera.”
5. Set the Function Switch on the
Transmitter to [ ].
6. Half-press the trigger button on the
Transmitter to focus the lens on the
camera.
7. Full-press the trigger button to open
the shutter. Releasing the trigger button
within 3 seconds, will close the shutter. If
you hold the button down for more than
3 seconds, the shutter will remain open
when you remove your finger from the
button, and it will close only when you
press the trigger button again.
TRIGGER YOUR CAMERA IN BULB MODE FOR A LONG EXPOSURE