User Manual

. Set your camera to continuous shooting
mode.
2. Attach the appropriate shutter release
cable to the shutter release [ ] port on
the Receiver and to the camera.
3. Mount the Receiver to the camera’s hot
shoe.
4. Set the Function Switch on the Receiver
to [ ].
5. Set the Function Switch on the
Transmitter to [ ].
6. Press the trigger button halfway to select
your focus point. Press and hold the
trigger button down on the Transmitter,
and the camera will shoot continuously.
7. If you hold the button for  to 3 seconds,
the camera will stop shooting when you
remove your finger from the button.
If you hold the button down for more
than 3 seconds, the camera will continue
shooting when you take your finger o
the button. To stop taking photos, press
the trigger button again.
TRIGGER YOUR CAMERA FOR CONTINUOUS SHOOTING