User Manual

ManualsBrandsVello ManualsGeneral Lighting AccessoriesFreeWave Fusion Basic 2.4 GHz Wireless Trigger System for Canon

22

. Set your camera to single shot mode.

2. Attach the appropriate shutter release

cable to the shutter release [ ] port on

the Receiver and to the camera.

3. Mount the Receiver to the camera’s hot

shoe.

4. Set the Function Switch on the Receiver

to [ ].

5. Set the Function Switch on the

Transmitter to [ ].

6. Press the trigger button on the

Transmitter halfway to focus.

Conﬁrmation LEDs on both the

Transmitter and Receiver should turn

green.

7. Press the trigger button all the way—the

LED will turn red, and the shutter will

be triggered. The LED on the Receiver

also turns red and then green when the

shutter is triggered.

TRIGGER YOUR CAMERA FOR SINGLE SHOTS