User Manual

9
Using the FreeWave Fusion Basic 2.4 GHz
helps you to eliminate cord clutter when
setting up studio lights. You can also
trigger multiple lights by using additional
Receivers (available separately).
To use the FreeWave Fusion Basic
2.4 GHz to wirelessly trigger a studio
flash, follow these instructions:
. Check to be sure that both the
Transmitter and Receiver are set to the
same channel.
2. Turn your camera and Receiver o.
3. Use the included studio light sync cable
(2.5 mm to 3.5 mm) to connect the
Receiver’s flash sync port [
] to your
studio flash’s 3.5 mm sync jack.
WIRELESSLY TRIGGER A STUDIO FLASH