User Manual

8
5. Set the desired power output on the flash
manually.
6. Fully press the shutter button on your
camera. All lights connected to Receivers
operating on the same channel as the
Transmitter should fire simultaneously.
Note: We recommend using a fully manually
controlled flash with this device. The FreeWave
Fusion Basic 2.4 GHz does not transmit TTL
settings, so you will always need to set the power
output manually.
Note: If the FreeWave Fusion Basic 2.4 GHz
doesn’t trigger your flash or camera on the
first attempt, try changing the channel on the
Transmitter and the Receiver using the Channel
Selectors until you find a channel that works.