User Manual

3
When you remove the Transmitter and
the Receiver from the box, you will notice
a set of four small numbered switches
on the top of each instrument. These
identical channel selector switches allow
you to change the channel on which your
Transmitter and Receiver operate. Each
of the four switches has two positions.
Note: Make sure that both the Transmitter and
Receiver are set to the same channel.
You can change the channel by moving the
position of one or more channel switches
using a ballpoint pen. In this way, you
can avoid interference from any source.
For instance, if other photographers
are working in the same area as you and
using radio remote controls, you can
change the channel on your FreeWave
Fusion Basic 2.4 GHz Transmitter and
Receiver so that their transmitters don’t
trigger your lights, and vice versa.
BEFORE YOU BEGIN
1 2 3 4
5 6 7 8
9 10 11 12
13
14
15
16