User Manual
20
RCC-N2
RCC-P1
RCC-O2
RCC-N3
RCC-O1
RCC-S1
RCC-C1
RCC-N1
RCC-C2
The FreeWave Viewer’s Shutter-Release
Cable enables the remote to function as
a remote shutter-release with certain
models of cameras. By using dierent
shutter-release cables, you can use a single
FreeWave Viewer Receiver with many
other DSLR cameras that are connected
to the Transmitter – or to a second, third,
or fourth Transmitter.
Vello shutter-release cables are listed to
the right. For these cables and cables for
other camera models check with your
Vello dealer.
CABLE SELECTIONS
RCC-C1 – Canon EOS 30 / 33 / 50 / 60D / 300D / 350D / 400D / 450D / 500D / 550D / 600D / 1000D /1100D
(Digital Rebel XT / Xti / XSi / T1i / T2i / T3 / T3i / XS) / Power Shot G10 / G11 / G12 Contax N / 645
Pentax K100D / K110D / K200D / K10D / K20D / K5 / K7 / *ist DS / DS2 / DL2 / DL / D
Samsung GX1S / GX1L / GX10 / GX20 / NX Series
RCC-C2 – Canon EOS 10D / 20D / 30D / 40D / 50D / 5D / 5D Mark II / 5D Mark III / 6D / 7D / 1D / 1Ds Mark I / Mark II
Mark II N / Mark III / Mark IV
RCC-N1 – Nikon D1 / D1H / D1X / D2 / D3 / D3x / D3s / D2H / D2Hs / D2X / D2Xs / D200 D300 / D300s / D700
Fuji S3pro / S5Pro Kodak DCS-14N
RCC-N2 – Nikon D90 / D600 / D3100 / D5000 / D7000
RCC-N3 – Nikon D70s / D80
RCC-O1 – Olympus E520 / E510 / E420 / E410 / E400
E450 / E620 / E-P2 / E-PL2 / SP-570UZ
SP-560UZ / SP-550UZ / SP-510UZ / XZ-1
RCC-O2 – Olympus E-1 / E-3 / E-5
RCC-P1 – Panasonic DMC-G1 / DMC-G10 / DMC-G2
DMC-GF1 / DMC-GH1 / DMC-GH2 / DMC-L10
DMC-L1 / DMC-FZ100 / DMC-G3
RCC-S1 – Sony a100 / a200 / a290 / a300 / a320
a350 / a380 / a390 / a500 / a500 / a560
a580 / a700 / a850 / a900 / SLT A33
SLT A55