User Manual

2
. Make sure you have all of
your transmitters handy and
in a line, ready to be paired
to the one receiver.
2. Slide the receiver’s
battery compartment
cover towards the rear
for removal and turn the
receiver on.
PAIRING A RECEIVER TO MULTIPLE TRANSMITTERS
3. Press the recessed
transmitter code set button
on the receiver. Use a pin-
like object that will fit into
the recessed hole.
4. After pressing the button,
the status indicator light
will blink repeatedly for
5 seconds. This signals
that the receiver is in
pairing mode and is ready
to receive a transmitter’s