User Manual

ManualsBrandsVello ManualsLighting & StudioFreeWave Aviator Wireless Flash Trigger 2-Transceiver Kit for Canon

Manual Flash Mode

Power Setting

Flash Group

set to O

24

Set a Flash Group to Manual mode

Using a Transceiver in Master mode:

1. Set your compatible TTL hot-shoe ﬂash

to TTL mode.

2. From the Transceiver's TTL Screen,

press the Select button, and the screen

will begin to blink.

3. Press the desired group button (A, B,

or C) twice to set that group to manual

mode.

4. Use the + and − buttons to adjust the

manual power setting.

5. Press Select twice when done to apply

the settings.

6. Press /Test to conﬁrm settings.

CHANGING A FLASH GROUP'S POWER MODE

Turn a Flash Group O

Using a Transceiver in Master mode:

1. Press the desired group button (A, B, or

C) to toggle through the power modes

until you reach O.

2. Press /Test to conﬁrm settings.