User Manual

Group A:B
Ratio Setting
Ratio Mode
Indicator
Group C
EV Setting
23
Ratio A:B Mode
Using a Transceiver in Master mode:
1. Set your TTL-compatible hot-shoe flash
to TTL mode.
2. From the TTL Screen, press Option to
enter Ratio A:B Mode.
3. Press Select to access the ratio
adjustment.
4. Use + and − buttons to adjust the ratio
(up to 7 stops plus or minus).
5. Press Select when done to apply the
setting.
6. Press /Test to confirm settings.
Ratio A:BC Mode
Using a Transceiver in Master mode:
1. From the TTL Screen, press Option
twice to enter Ratio A:BC Mode.
2. Press Select to access the ratio
adjustment.
3. Use + and − buttons to adjust the ratio
(up to 7 stops plus or minus).
4. Press Select to access an EV (exposure
adjustment) to Group C, which will
adjust its power in relation to group B.
5. Use the + and − buttons to adjust the
EV ratio.
6. Press Select when done.
7. Press /Test to confirm settings.