User Manual

1. With your Receiver and ﬂash O, mount

the Receiver to your 1/4˝-20 light stand

or accessory stand. Take care not to

overtighten the Receiver.

2. Slide the Group Switch to A, B, or C to

select the desired Group. (The Group

D setting on the Receiver is for factory

calibration only and is not available

for use.)

3. Slide the Channel Switch to 1, 2,

3, or Auto. (“Auto” is equal to the

Transceiver's Channel “4”.)

MOUNTING THE RECEIVER

Note: make sure that all your FreeWave Aviator units are set to the same channel before use.