User Manual
2
The FlashBoss TTL Transceiver
functions as both a TTL
transmitter and receiver that
take full advantage of
Nikon’s i-TTL flash metering
technologies. Lightweight and
compact, it mounts to a camera
and functions as a transmitter,
sending TTL metering data to
your remote flashes. Attached
to a flash, it’s a slave that
adjusts the output power
of the flash accordingly. The
FlashBoss supports HSS and
allows flash synchronization
of up to 1/8000 of a second.
THANK YOU FOR CHOOSING VELLO
As a transmitter, the FlashBoss
gives you control over your
lighting setup. Each group
can be individually set to
TTL, manual, delayed time
(DT), and o. Controls for
flash zoom and exposure
compensation can be remotely
set for all compatible flashes.
The 2.4 GHz radio signal oers
control from over 300 feet
(100 m) away without line-of-
sight positioning. Trigger your
camera around corners or even
through a wall. Thirty selectable
channels assure you of trouble-
free shooting without any
interference from other remote
units in the area. A backlit digital
display allows for easy viewing in
all kinds of lighting conditions.