User Manual

24
The flash output level can be
set manually for greater creative
control over your images.
The 1/1 setting is the full-power
flash, and each successive setting
halves the light output, all the
way down to 1/128. You can
also fine-tune the flash output
in increments of one third.
Adjusting the Settings
in Manual Mode
1. Press and Hold the Zoom
button repeatedly until the
manual mode screen appears.
In this menu, the + and
− buttons will adjust the
power for each group.
2. Press Gr/Ch, and use the +
and − buttons to choose the
desired group mode: All (a),
A:B, or A:B:C.
3. Press Set to confirm.
MANUAL MODE
Setting the Flash
Power Level
1. Press the Ch/Gr button to
select a group, and press the
+ and – buttons to adjust the
flash power level for each
group.
To set the flash coverage in
Manual mode, see Controlling
Flash Coverage (Zoom) below.
Manual mode