Quick Setup Guide

10
MOUNTING A FLASH TO THE FLASHBOSS
A flash can be mounted
onto the FlashBoss when the
FlashBoss is attached to the
camera. In this configuration,
the FlashBoss can operate as
a transmitter or receiver.
The FlashBoss TTL passthrough
capability allows the TTL
metering data to flow from the
camera, through the FlashBoss,
and directly to the flash.
A flash and FlashBoss can also be
used for remote operation with
the FlashBoss in receiver mode.
Make sure the FlashBoss
and your flash are turned
o before proceeding.
Mount the flash to the
FlashBoss’s hot-shoe mount,
and turn on the flash.