User Manual

1. Ensure that the power is
turned off on the camera
and that the grip’s on/off
switch is set to Off.
2. Flip the battery tray
latch so you can rotate it
counterclockwise and pull
the battery tray out of the
grip.
3. In the battery tray are
compartments for batteries
1 and 2. Align battery 1 as
indicated by the diagram,
noting the springs inside
the compartment. Insert
battery 1 spring-side first,
and push down so it snaps
into place.
Inserting Batteries
9
OVERVIEW
ASSEMBLY
INTRODUCTION