BG-N4 .
Introduction Thank you for choosing Vello and congratulations on your new BG-N4.2 battery grip purchase. Enjoy the many benefits that a battery grip offers, such as extended shooting time and more control and comfort when shooting in a vertical (portrait) orientation. The Vello BG-N4.2 is compatible with the Nikon D7000 DSLR cameras. The BG-N4.2 accepts one Nikon EN-EL15 rechargeable battery, in addition to the camera’s internal battery.
Only use with batteries and battery holders recommended in this manual. 3. Cover the power terminals with the contact cap when the BG-N4.2 is not in use. This prevents electrical shorts caused by metal objects touching the power terminals. 4. 5. When the battery holder is removed from the grip, remove the batteries or place the holder in a container to prevent electrical shorts caused by contact with other metal objects. The memory card access lamp may light up when the BG-N4.
1 Sub-Command Dial * 7 Camera Contact Cover Holder 2 Shutter-Release Button * 8 Signal Contacts 9 AE-L/AF-L Button * 10 Main Command Dial * 11 Multi Selector * 12 Attachment Wheel 13 Battery Chamber Cover 3 Control Lock Switch To prevent accidental triggering, the control lock switch locks the shutter-release button, AE-L/AF-L button, multi selector dial, as well as the main and sub-command dials on the BG-N4.2. Unlock prior to use by switching to the position.
1. Ensure that the power is turned off on the camera and that the Control Lock on the BG-N4.2 is in the L position before attaching the grip. 2. Remove the contact cap from the BG-N4.2 battery grip. Replace the cap when not in use to protect the contacts. 6 3. The contacts for the BGN4.2 are on the bottom of the camera where they are protected by a contact cover. Remove the contact cover before mounting the grip.
A B 4. To prevent loss, place the camera contact cover in the contact cover holder on the BG-N4.2 by pushing it into groove until it is secure. 5. Connect the BG-N4.2 grip to the camera, while aligning the camera’s tripod socket A with the grip’s mounting screw B . Removing the battery from the camera before mounting the grip is not required. 7 6. Rotate the attachment wheel in the direction shown by the LOCK arrow until it is firmly tightened.
Inser ting Batteries A B C 1. Ensure that the power is turned off on the camera and the Control Lock on the BG-N4.2 is in the L position. Turn the batterychamber latch counterclockwise to open the battery chamber door. 2. Remove the battery holder from the BG-N4.2 grip. The EN-EL15 battery holder comes pre-installed when shipped. 8 3. Nikon EN-EL15 Battery: Match the arrow on the battery A with the battery holder’s contact and push the battery down B .
A B C 4. AA Batteries: Place six AA batteries of the same type in the AA battery holder as shown, while ensuring that they are in the correct orientation. 5. Insert the battery holder into the grip and turn the latch clockwise to lock it, and return the latch to the down position. Turn the camera on and check the battery level in the control panel or viewfinder. 9 6.
Battery Info The camera displays the following battery levels . Nikon EN-EL15 Battery: Control Panel Viewfinder AA Batteries: Description Control Panel Viewfinder Battery fully charged. Battery partially discharged. (blinking) (blinking) Description Battery fully charged. Low battery. Prepare spare batteries. Battery exhausted. Shutter release is disabled. 10 (blinking) (blinking) Low battery. Prepare spare batteries. Battery exhausted. Shutter release is disabled.
AA Battery Settings To ensure that the camera shows the correct battery level when AA batteries are used, choose the appropriate setting in the Custom Settings menu (Group d). Battery Type Nikon Rechargeable D7000 MB-D11 Batteries The camera can display information (including calibration information) for Nikon EN-EL15 battery via the Battery Info option in the Setup Menu. Only battery levels are displayed for AA batteries.
Removing The Batteries B A C 1. EN-EL15 Holder: While pressing and holding the PUSH button A on the holder, slide the battery toward the button B and lift up to remove C . 2. AA Holder: Remove the batteries one row at a time (as shown). Ensure that the batteries do not drop during this process.
Battery & Power EN-EL15 Batteries At low temperatures of about 50° F (10° C) and below, the Nikon EN-EL15 batteries will decrease in performance. Warming up a cold battery can recover some of the lost charge. AA batteries have less capacity and lose more performance at low temperatures. AA Batteries In most cases, Nikon EN-EL15 battery will provide better performance than AA batteries when used in the Vello BG-N4.2.
Specifications Power Source One EN-EL15 rechargeable Li-ion battery or eight LR6 Alkaline, HR6 Ni-MH, FR6 Lithium, or ZR6 Nickel-Manganese AA batteries Operating Temperature 32 – 104 °F (0 – 40 °C) Dimensions Approximately 132.6 x 53.2 x 84.7 mm / 5.22 x 2.1 x 3.33 in. Weight Approximately 6.7 oz. (191.8 g), with EN-EL15 battery holder (excluding batteries) * Approximate measurements.
Warranty Vello provides a limited warranty that this product is free from defects in materials and workmanship to the original purchaser under normal use for a period of one (1) year from the original purchase date or thirty (30) days after replacement whichever occurs later. Vello’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at its option, of any product which fails during normal consumer use.
© Copyright 2012 Gradus Group All other trademarks are the property of their respective owners
