User Manual

4. Insert the BG-N4 grip
power contacts into the
camera’s battery chamber
as shown. Make sure to
align the camera’s tripod
socket with the BG-N4
mounting screw.
5. Rotate the attachment
wheel in the direction
shown by the arrow until it
is firmly tightened.
6. To insert your batteries into
the camera grip, remove the
battery tray from the grip by
turning the battery tray latch
counterclockwise and remove
it from the unit.
When removing the grip, turn the
camera power off, remove batteries,
and replace protective contact cap.
7
OVERVIEW INTRODUCTION
ASSEMBLY