User Manual

4. Insert the BG-N12 grip
power contacts into the
camera’s battery chamber
as shown. Make sure to
align the camera’s tripod
socket with the BG-N12
mounting screw.
5. Rotate the attachment
wheel in the direction
shown by the arrow until it
is firmly tightened.
6. Connect the shutter release
cable from the socket on the
end of the battery grip to the
remote release/GPS port on
the D3100/D3200/D3300 body.
7. Turn the camera on and check
the battery level on the LCD or
viewfinder.
When removing the grip, turn the
camera power off, remove batteries,
and replace the protective contact cap.
GPS
7
OVERVIEW INTRODUCTION
ASSEMBLY