User Manual

4. To prevent loss, place the
camera battery chamber
cover into the BG-C9
battery chamber holder as
indicated above. Swing the
battery chamber cover shut
so that it locks into place.
5. Remove the protective
cap and connect the BG-
C9 grip to the camera,
while aligning the grip’s
mounting screw with the
camera’s tripod socket.
6. Rotate the attachment
wheel in the direction
shown by the arrow until it
is firmly tightened.
1
2
3
When removing the grip, turn
the camera power off, remove
the batteries, and replace the
protective contact cap.
1
2
3
7
OVERVIEW INTRODUCTION
ASSEMBLY