User Manual

4. Insert the grip power

contacts into the camera’s

battery chamber as shown.

Make sure to align the

camera’s tripod socket

with the mounting screw.

5. Rotate the attachment

wheel in the direction

shown by the arrow until it

is firmly tightened.

6. Connect the shutter release

cable from the socket on the

end of the battery grip to the

remote release port on the

Canon T3, T5, or T6 body.

7. Insert the batteries or battery

(grip may be used with just

one), turn the camera on, and

check the battery level on the

LCD or viewfinder.

When removing the grip, turn the camera power off, remove batteries, and replace protective contact cap.

Look for this symbol to locate the jack

for connecting remote devices.

OVERVIEW INTRODUCTION

ASSEMBLY