BG-C7 BATTERY GRIP Designed for the Canon Rebel T3/T5/T6 SLR Cameras
Introduction Thank you for choosing Vello and congratulations on your new BG-C7 battery grip purchase. Enjoy the many benefits that a battery grip offers, such as extended shooting time and more control and comfort when shooting in a vertical (portrait) orientation. The Vello BG-C7 is compatible with the Canon T3, T5, and T6 DSLR cameras. The BG-C7 accepts up to two Canon LP-E10 rechargeable batteries.
2. Only use with batteries recommended in this manual. 3. 4. Cover the power terminals with the contact cap when the BG-C7 is not in use. This prevents electrical shorts caused by metal objects touching the power terminals. If you notice smoke, an unusual smell, or noise from the battery pack, discontinue use immediately. Remove the batteries and take the device to a Vello authorized reseller. 3 5. The BG-C7 does not have a power switch.
Overview 7 1 8 11 2 3 6 9 12 10 5 4 4
2 Hand Strap Mount Provides bottom mounting position for the use of a hand strap. 6 Anti-Slip Rubber Grip Provides secure and comfortable grip when shooting vertically. 10 Cable Connecting Socket Accepts sub mini connector of the shutter release cable. 3 Shutter Release Button Use as an alternate shutter release button for shooting in vertical (portrait) mode. 7 Contact Cap Protects metal power contacts. Keep this cap on when the grip is not connected to the camera.
Attaching The Grip 1. Ensure that the power is turned off on the camera. 2. Turn the camera upside down and open the camera battery chamber. Pull gently at a 35º angle until the chamber door comes loose. 6 3. Slide the camera battery chamber door into the BGC7 chamber door holder in order to avoid loss.
INTRODUCTION Insert the grip power contacts into the camera’s battery chamber as shown. Make sure to align the camera’s tripod socket with the mounting screw. 5. Rotate the attachment wheel in the direction shown by the arrow until it is firmly tightened. Look for this symbol to locate the jack for connecting remote devices. 7. Insert the batteries or battery (grip may be used with just one), turn the camera on, and check the battery level on the LCD or viewfinder.
ONE-YEAR LIMITED WARRANTY This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.