BG-C15-2 BATTERY GRIP Designed for the Canon 77D and T7i DSLR Cameras
Thank you for choosing Vello The Vello BG-C15-2 battery grip offers extended shooting time and comfort when shooting in a vertical (portrait) orientation. The grip is compatible with the Canon 77D and T7i DSLR cameras and accepts up to two Canon LP-E17 rechargeable batteries. It offers an alternate shutter release button that triggers the camera via the included shutter release cable, making the grip ideal for shooting portrait photography.
2. Use only with the batteries and battery holders recommended in this manual. 3. If you notice smoke, noise, or an unusual smell from the battery pack, discontinue use immediately. Remove the batteries, and take the device to a Vello authorized reseller. 4. 5. 6. 7. Remove batteries from the grip when not in use. 8. 9. Keep out of reach of children. Do not attempt to disassemble. Avoid exposing this product to water or extreme humidity, and keep it in a cool, dry place.
Overview 17 1 18 16 4 5 15 8 2 3 7 6 12 13 9 14 10 4 11
INTRODUCTION 7 Thumbwheel lock 13 Battery slot 2 latch 2 Handstrap mount 8 Battery compartment latch 14 Control lock switch 3 Tripod socket 9 Battery compartment door 15 Camera battery door holder 4 2.5 mm remote cable socket 10 Battery slot 1 16 Power contacts 5 Nonslip grip 11 Battery slot 1 latch 17 Contact cap 6 Mounting screw 12 Battery slot 2 18 Shutter release cable (2.
Attaching the Battery Grip 1. Ensure that the camera power is turned off. 2. Re m ove t h e c a m e r a’s battery chamber door. Pull gently at a 45° angle until the door detaches. 6 3. Remove the power contact cap. Slide the chamber door into the BG-C15-2’s camera battery door holder for safekeeping.
INTRODUCTION 5. Rotate the thumbwheel in the direction of the arrow until the grip is secured to the camera. 7 6. Connect the shutter release cable from the 2.5 mm remote cable socket on the grip to the remote control terminal on the camera. OVERVIEW Inser t the battery grip’s power contacts into the camera’s battery chamber, and attach the grip to the camera. ASSEMBLY 4.
Inserting the Batteries 1. Turn off the camera’s power, and make sure the grip’s control lock switch is in the off position. 8 2. Slide the battery compartment latch to the left and open the battery compartment door.
INTRODUCTION 4. Turn on the camera power, and switch the grip’s control lock to the on position. 9 Note: When removing the grip, turn off the camera’s power, switch the grip’s control lock to off, and then remove the batteries. OVERVIEW Insert the first battery into slot 1, and push it in until it clicks secure. Repeat for slot 2. ASSEMBLY 3.
Specifications Power source Up to two Canon LP-E17 type rechargeable Li-ion batteries Operating temperature 32°F to 104°F (0°C to 40°C) Dimensions (H × W × D) 3.8 × 5 × 3 in. (9.8 × 12.7 × 7.6 cm) Weight 7.6 oz.
ONE-YEAR LIMITED WARRANTY This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
www.vellogear.com All other trademarks are the property of their respective owners.
