Data Sheet

VMA205
V. 02 – 12/04/2018 6 ©Velleman nv
Compile and upload this code to your Arduino
®
UNO. Please note during the uploading progress, to turn the
switch to “off” and to turn to “on” when the uploading is finished. When it is done, you can open your cell phone
WiFi to check if there is a WiFi named “VMAWIFI”.
Now, use your notebook to connect your WiFi shield and to receive data. Select “VMAWIFI” and enter the
password “123456789”.
Run the TCPUDPDbg software. Click “Create Connection”, choose Type “TCP”, IP “192.168.4.1” and Port “333”.
The IP and port are fixed depending on the ESP8266 chip datasheet.