Data Sheet

ManualsBrandsVelleman ManualsArduino ShieldsVelleman WiFi ESP-WROOM-02 Shield
2.13. AT+CIPMUX—Enable or Disable Multiple Connections! 49"..............................................................
2.14. AT+CIPSERVER—Deletes/Creates TCP Server! 50"..........................................................................
2.15. AT+CIPMODE—Sets Transmission Mode! 50"...................................................................................
2.16. AT+SAVETRANSLINK—Saves the Transparent Transmission Link in Flash! 51"...............................
2.17. AT+CIPSTO—Sets the TCP Server Timeout! 52"...............................................................................
2.18. AT+PING—Ping Packets! 52".............................................................................................................
2.19. AT+CIUPDATE—Updates the Software Through Wi-Fi! 53"...............................................................
2.20. AT+CIPDINFO—Shows the Remote IP and Port with +IPD! 53"........................................................
2.21. +IPD—Receives Network Data! 53"...................................................................................................
2.22. AT+CIPSNTPCFG—Sets the Conﬁguration of SNTP! 54"..................................................................
2.23. AT+CIPSNTPTIME—Checks the SNTP Time! 54"..............................................................................
2.24. AT+CIPDNS_CUR—Sets User-deﬁned DNS Servers; Conﬁguration Not Saved in the Flash! 54"....
2.25. AT+CIPDNS_DEF—Sets User-deﬁned DNS Servers; Conﬁguration Saved in the Flash! 55"............
Appendix  56 .............................................................................................................................................
Q&A  57......................................................................................................................................................