LAB 1 TECHNICAL DOC 3 IN ONE LAB DEVICE Velleman Legen Heirweg 33 9890 Gavere Belgium
LAB1 Technical Doc SPECIFICATIONS DIGITAL MULTIMETER 3 1/2 backlit LCD Automatic polarity indication DC voltage 200mV to 600V in 5 steps AC voltage 200V and 600V DC current 200uA to 10A in 5 steps Resistance test 200ohm to 2Mohm Diode, transistor and continuity tester Data Hold function and buzzer CATI 600V CATII 300V REGULATED POWER SUPPLY Selectable output voltages: 3 - 4.5 -6 - 7.5 - 9 - 12Vdc Output 1.
LAB1 Technical Doc Part No Description LAB-P01 Main enclosure part (*) LAB-P02 Main enclosure bottom part LAB-P03 Mains connector support LAB-PM01 Alu heat sink plate LAB-P06 Power supply front panel LAB-P07 Power supply turning knob LAB-M01 Multimeter front panel LAB-M04 Multimeter display window LAB-M02 Multimeter turning knob LAB-M03 Multimeter ”hold” knob LAB-P08 Multimeter battery holder LAB-P04 Soldering iron support LAB-P05 Soldering station knob LAB-F01 Fire proof spong
LAB1 Technical Doc Declaration of Conformity We, Manufacturer Velleman Legen Heirweg 33 9890 Gavere Belgium declare that the product LAB1 - 3 in one LAB device if used according the instructions included with the unit meet the directives in accordance with 89/336/EEC-EMC 73/23 EEC Directive and EN 55022 Electromagnetic compatibility - Emission (CISPR22 level) IEC 61000 -4 Electromagnetic Compatibility - Generic immunity standard EFT IEC 600065 Low voltage directive 73/25/EG - Insulation IEC 1010-1
LAB1 Technical Doc DIAGRAMS © Velleman page 5
LAB1 Technical Doc SUPPLY BLOCK DIAGRAM MAINS TRANSFORMER SOLDERING STATION SECTION TRANSFORMER DC SUPPLY SECTION DMM BACKLIGHT 9V BATTERY DMM SECTION © Velleman page 6
Power supply LAB1 Technical Doc © Velleman page 7
Soldering station LAB1 Technical Doc © Velleman page 8
Multimeter part 1 LAB1 Technical Doc © Velleman page 9
Multimeter part 2 LAB1 Technical Doc © Velleman page 10
LAB1 Technical Doc CE - TEST RESULTS © Velleman page 11
LAB1 Technical Doc Radiated disturbance Field MR-079-2005 EUT: LAB1 (Prototype) Manufacturer: Velleman ( Witness S.Santens) Operating Condition: Normal Test Site: ESM EMC centre Operator: Meuleman Hendrik Test Specification: CISPR22 / EN55022 Class B Comment: Pré-compliance Power supply connected with Multimeter Start of Test: 1/06/2005 / 9:31:01 SCAN TABLE: "CISPR22 Field" Short Description: CISPR22 Field Strength Start Stop Step Detector Meas. IF Transducer Frequency Width Time Bandw. 30.0 MHz 1.0 GHz 80.
LAB1 Technical Doc Test Report EFT (Electrical Fast Transient) Company Name: ESM Engineering Services & Marketing EMC lab Report No.: MR-079-2005 Date of test: June-01-2005, 10:22 Tester: Meuleman Hendrik Customer: Velleman S.Santens E. U. T.: LAB 1 Standard used: IEC 61000-4-(2004) Application: Power Supply AC Ambient Temperature: 23.
LAB1 Technical Doc D.U.T Name: LAB 1 Serial Number: Prototype Operation Mode: DMM on Reading Supp Connection: AC 220 V 50 Hz Description: Soldering iron ; DC Poser supply ; DMM Test Procedure Pulse Name: IEC 61000-4-(2004) : Part 4 (100kHz) Test generator: EFT500 Coupling network: CNI501 Software No.: 000509 Serial No.: 0196-97 Serial No.: 0695-03 Test Setup V: 1000 f: 100 kHz td: 0.
LAB1 Technical Doc Company Name: ESM Engineering Services & Marketing EMC lab Report No.: MR-079-2005 Date of test: June-01-2005, 10:06 Tester: Meuleman Hendrik Customer: Velleman S.Santens E. U. T.: LAB 1 Standard used: IEC 61000-4-(2004) Application: Power Supply AC Ambient Temperature: 23.
LAB1 Technical Doc D.U.T Name: LAB 1 Serial Number: Prototype Operation Mode: DMM on Reading Supp Connection: AC 220 V 50 Hz Description: Soldering iron ; DC Poser supply ; DMM Test Procedure Pulse Name: IEC 61000-4-(2004) : Part 4 (5kHz) Test generator: EFT500 Coupling network: CNI501 Software No.: 000509 Serial No.: 0196-97 Serial No.
LAB1 Technical Doc Test Interruption Test interrupted ! Elapsed Test time: 50 s Coupling: L Display read-out DMM affected by pulses Test Result V: Coupling: Elapsed Test time: Result: ±1000 V f: 5 kHz td: 15 ms tr: 300 ms L, N, PE, L+N, L+PE, N+PE, L+N+PE 1 m Test passed ! Class A result © Velleman page 17
LAB1 Technical Doc Low voltage Insulation MR-079-2005 EUT: LAB 1 (Prototype) Manufacturer: Velleman ( Witness S.
LAB1 Technical Doc Low voltage Dielectric strenght MR-079-2005 EUT: LAB 1 (Prototype) Manufacturer: Velleman ( Witness S.
LAB1 Technical Doc Electrostatic Discharge immunity test MR-079-2005 EUT: LAB 1 (Prototype) Manufacturer: Velleman ( Witness S.
LAB1 Technical Doc Velleman Legen Heirweg 33 9890 Gavere Belgium © Velleman page 21
