User manual
12
Short press on the 'mode' button: selecting a meter-display.
Long press on the 'mode' button: opening the set-up menu.
16. USE
Use
Set-up menu
Access to the Set-up menu by a "long" push on the 'mode' button.
Short press: changing settings
long press: next function
Keep pressed: save changes and exit
Speed: refreshing the screen (Fast - Mid - Slow)
Impedance: "2", "4" or "8" ohms for speaker output power calculation, in case the unit is connected to spea-
ker output.
Power: "AUTO" range or a maximum value that depends on the chosen impedance.
For impedance = 2: Possible choices are "1200 mW", "12W", "120W" or "1200W"
For impedance = 4: Possible choices are "600 mW", "6W", "60W" or "600W"
For impedance = 8: Possible choices are "300 mW", "3W", "30W" or "300W"
Sticky Bar: "Yes" or "No"
When selected, small residual sticky bars appear also on the third octave spectrum screen.
Spectrum dB: "dBu" or "110 dB". (110 dB stands for the "Power dB" display which can range from 80dB to
110dB max, depending on the selected Power range).
Advanced settings: see pag. 10