Datasheet

_______________________________________________________________________________________________________________________________________________________
6
8. LED’s (Check the polarity!)
Mount the LED exactly like in the drawing:
COLOR= 2...5
LD...
CATHODE
18mm
q LD1: 3mm red, low current L-934LSRD (2)
q LD2: 3mm red, low current L-934LSRD (2)
q LD3: 3mm red, low current L-934LSRD (2)
q LD4: 3mm red, low current L-934LSRD (2)
q LD5: 3mm red, low current L-934LSRD (2)
q LD6: 3mm red, low current L-934LSRD (2)
q LD7: 3mm red, low current L-934LSRD (2)
q LD8: 3mm red, low current L-934LSRD (2)
q LD9: 3mm red, low current L-934LSRD (2)
q LD10: 3mm red, low current L-934LSRD (2)
Tip: For easy mounting at the correct height, you can first mount the
front panel on the PCB (see next point), then:
1. Insert the LED (watch the polarity).
2. Turn over the unit with the front panel on a flat surface.
3. Let the LED touch the table surface.
4. Solder the connections.