Specifications

12
(B) Car burglar alarm used in combination with our RF codelock (K8057 & K8059 - VM109).
Connect the klaxon or siren to the relay as shown in the figures.
Attention: The common wire of the klaxon can be connected either to the + or the - of the alarm (check with a volt-meter).
Connect the connecting terminals"+" and"-" of the alarm to the corresponding poles of the battery.
Connect the point COM of the code lock with the "+" and the point NO with the connection DIS of the alarm.
The receiver must be set to "TOGGLE" mode.
1. Warning device connected to chassis
Final connection
Fig. 5