Manual
Table Of Contents
- AMA2/AMA3
- HANDLEIDING
- MODE D'EMPLOI
- MANUAL
- ANLEITUNG
- SMS BERICHTEN VERZENDEN EN ONTVANGEN
- AMA2/3 REV 4.30
- AMA2/3 REV 4.30
- Fxxxxy=z
- AMA2/3 REV 4.30
- AMA2/3 REV 4.30
- AMA2/3 REV 4.30
- AMA2/3 REV 4.30
- AMA3: type van het alarmtoestel
- AMA2/3 REV 4.30
- AMA2/3 REV 4.30
- AMA2/3 REV 4.30 (De drukknopled brand continu bij het aanzetten van het contact)
- AMA3 REV 4.30
- OUTPUT OFF/ON
- 4. HOE WEET IK WANNEER IK GPS ONTVANGST (FIX) HEB?
- FR – MODE D’EMPLOI
- ENVOYER ET RECEVOIR DES MESSAGES SMS
- AMA2/3 REV 4.30
- AMA2/3 REV 4.30
- AMA2/3 REV 4.30
- AMA2/3 REV 4.30
- AMA2/3 REV 4.30
- AMA2/3 REV 4.30
- AMA3: type de système d’alarme.
- AMA2/3 REV 4.30
- AMA2/3 REV 4.30
- AMA3 REV 4.30
- AMA2/3 REV 4.30
- AMA2/3 REV 4.30
- AMA2/3 REV 4.30
- AMA2/3 REV 4.30
- AMA2/3 REV 4.30
- AMA2/3 REV 4.30
- AMA2/3 REV 4.30
- AMA2/3: device type
- AMA2/3 REV 4.30
- AMA2/3 REV 4.30 (service on = led on the push button blinks fast)
- or
- AMA2/3 REV 4.30 (service off = led on the push button burns continuously)
- AMA3 REV 4.30
- DE – ANLEITUNG
- 1. INSTALLATION
- Der AMA2/3 funktioniert mit einer SIM-Karte damit er eine SMS-Nachricht senden kann.
- AMA2/3 REV 4.30
- AMA2/3 REV 4.30
- AMA2/3 REV 4.30
- AMA2/3 REV 4.30
- AMA3: Typ Alarmgerät
- OUTPUT ON
- AMA2/3 REV 4.30
- OUTPUT OFF
- AMA2/3 REV 4.30
- SERVICE ON (die LED blind ständig beim Starten des Fahrzeuges)
- SERVICE OFF (die LED brennt beim Starten des Fahrzeuges)
- AMA3 REV 4.30
- OUTPUT OFF/ON
- AMA2/3 REV 4.30
2.3.1 FUNCTION 1: LINE TEST
If activated, the AMA2/3 will generate a line test according to the programmed time interval.
Send the following message to the AMA2/3: Fxxxx1=z
F = stands for FUNCTION
xxxx = stands for the password
1 = stands for the function type
z = stands for the line test status
(0 = switched off (default value), 1 = every day, 2 = every week, 3 = every month).
Do not enter any spaces before or in your message. After about 45 seconds the AMA2/3 will send a
SMS message to confirm.
2.3.2 FUNCTION 2: AUX INPUT (AUX ALARM)
Immediate or delayed alarm (NO or NC) – switched to ground. Programmation against key theft (3.3.)
Send the following message to the AMA2/3: Fxxxx2=z
F = stands for FUNCTION
xxxx = stands for the password
2 = stands for the function type
z = stands for the status
0 = AUX Input: direct alarm and NO-input
1 = AUX Input: direct alarm and NC-input
2 = AUX Input: delayed alarm (15 seconds) and NO-input - default value
3 = AUX Input: delayed alarm (15 seconds) and NC-input
4 = AUX Input: delayed alarm (15 seconds) and NO-input with recognition through push button
5 = AUX Input: delayed alarm (15 seconds) and NC-input with recognition through push button
Do not enter any spaces before or in your message. After about 45 seconds the AMA2/3 will send a
SMS message to confirm.
The modification of a value will be active after receiving a confirmation message by SMS.
The AMA2/3 will send a message with the following information to your cell phone:
AMA2/3 REV 4.30
AUX ALARM
CONTACT: OFF
BAT=OK SIG=4
GPS=0/1 AMA3
TIME:201446 AMA3
DATE:010707 AMA3
50:55:34 N AMA3
005:26:31 E AMA3
SPEED:0.00 AMA3
OUTPUT OFF/ON
23