User manual

HAM263D

00 (10/10/2008) VELLEMAN

General status LEDs

EXIT/ARMED ON System armed (whole system or one of the partitions)

OFF System disarmed (the whole system)

Flash System in exit delay period

AC POWER ON AC power normal

Flash AC power failure

Flash Alternatively

with Battery LED

System in Standby mode

BATTERY ON Battery low

OFF Battery normal

Flash Battery under testing

Flash Alternatively

with AC power

LED

System in Standby mode

PROGRAM ON System in programming mode

OFF System in normal operation mode

PART. 1 ON Partition 1 armed

OFF Partition 1 disarmed

Flash During Exit Delay

PART. 2 ON Partition 2 armed

OFF Partition 2 disarmed

Flash During Exit Delay

FORCED TO ARM ON System will be forced to arm if the faulty zone is not

cleared

OFF System armed normally

Flash System forced to arm with the faulty zone(s) bypassed

by the system

Zone status LEDs

ON Zone abnormal

OFF Zone normal

Fast flashing Zone was or still is in alarm mode

Fast flashing, 3x with

stopping interval

Zone was in alarm mode and is stored in alarm memory. System

is disarmed

Slow flashing Zone is bypassed

Control key buttons description

There are 14 buttons for code entry and function confirmation

0 ~ 9 Numeric buttons for code entry

* # For function confirmation

HOME For home mode arming and programming

BYPASS For (temporarily) bypassing zones while arming system