User manual

3 FREQUENTLY-USED FUNCTIONS
3.1 Record
To record remotely, click “ ” (simplified version) or “ ” (full function version) → “ ” to go to the
“Record Setting” page. For details, please refer to “5. RECORD” at page 17.
In the “Record Setting” page, you can set the following items:
‧Record type
‧Pre- / post-event record
‧Record time setting
‧Record path
Note: The record function will be disabled when the reserved disk capacity in
“Reserved(MB)” is larger than the current disk capacity in “Free(MB)”.
When “Manual” is checked, click “ ” (simplified version) or “ ” (full function version) on the main
control panel to start manual recording immediately, and all recordings will be saved in the location
specified in “Record Path”.
When “Motion” and / or “Alarm” are checked, the recording function will be enabled for a motion or
alarm event, and all recordings will be saved in the location specified in “Record Path”.
5