User manual

8.2 PTZ Control
Note: This function is available only when the selected device is a camera, and the camera
has its own OSD menu or function control, such as a speed dome camera or
motorized camera.
Note: Some buttons may not be enabled or appeared for selected models.
Click or to display the PTZ control panel as follows.
Button
Function
Simplified Full Function
Description
Preset 1~16 1~16 1~16 Click to move the PTZ camera to the selected preset point.
Auto Pan
Click to activate the auto function.
Before using it, you need to assign a specific function that will be
enabled when “AUTO” is clicked. For details, please refer to the user
manual of the PTZ camera.
Auto Tracking
Click to activate the auto tracking function if the connected PTZ
camera supports it and have set the surveillance area.
Auto Move
Click to enable the auto move function. It allows the camera to move
to the direction where your cursor stays.
IR Control
Click to activate the IR function manually.
Zoom In / Out
/
/
Click to zoom in / out the image.
Max Zoom In / Out
/
/
Click to zoom in the image to the largest / zoom out the image to its
original size.
Smart Zoom
Click to enable the Smart Zoom function to zoom in on the object
which triggers motion or alarm recording automatically.
Smart Zoom 10
Click to enable the Smart Zoom function to get 10X zoom in on the
object which triggers motion or alarm recording automatically.
DPTZ
Click to enable digital PTZ functions with zoom-in ratio up to 16X.
Focus Near / Far
/
/
Click to adjust the focus of the image.
Manual Alarm Out
Click to force your alarm-out device to work. For example, when your
alarm device is a buzzer, click this button and your buzzer will start to
sound even if there’s no alarm event.
Arrow Keys
-- --
Click to:
1. Move the camera lens up / up-left / down / up-right / left /
down-right / right / down-left.
2. Make selection.
Turbo Step
Speed up the menu selection from 1 to 10.
Ex: If the value of the turbo step is set to 5, one mouse-click will
function as 5 mouse-clicks when you click the arrow keys.
To use this function, you need to set it in the camera configuration
page first.
26