User manual

7.2.2 Record Type

There are four record types: User / Motion / Alarm / RETR. Check the record type you want to

search.

Note: This section is available only when the “Record” tab is selected.

Function Description

User

Check this and all logs for manual recording will show. The log is generated when this function is enabled in

“Address Book”, and

or is selected in the main control panel.

Motion

Check this and all logs for motion recording will show. The log is generated When the connected device has

detected a motion event during the time specified in “Record Setting”.

Alarm

Check this and all logs for motion recording will show. The log is generated When the connected device

supports the alarm function and has detected an alarm event during the time specified in “Record Setting”.

RETR

Check this and all logs for RETR recording will show. The log is generated when the connected device

supports the R.E.T.R. function and this function is enabled in “8.1 DVR Control Panel”.

7.2.3 Log List

There are three log lists: Record, Backup, Event & Event Trigger. By defaults, the log lists show

all the logs. To quickly search the logs you want, you can narrow down the list by time and / or

record type.

Function Description

Reserve

Select the log which is considered important and can’t be removed, and click it to prevent accidental

removal.

Play Click it to know what’s recorded for the selected log.

Repair Select the log with “Error” checked, and click it to try to fix the file.

Delete / Delete All

Select a specific log you don’t need or all logs, and click “Delete” or “Delete All” to remove.

The log with “Reserve” checked will not be removed even when it’s selected to be removed.