User manual

5.2 Record Time Range
5.2.1 Weekly
Click “Weekly” tab, and you will see a weekly time table indicating the week days (Mon ~ Sun)
and hours (0 ~ 24), similar to the figure below:
X axis: 0 ~ 24 hours. Each time interval within a square is 15 minutes.
Y axis: Monday ~ Sunday.
Operation: You can set the record schedule for 3 record types as needed in this time table:
 The 1st timeline – Schedule l recording, indicated in yellow,
 The 2nd timeline -- Alarm recording, indicated in magenta, and
 The 3rd timeline -- Motion recording, indicated in cyan.
Click and hold the start time point, and drag to the end time point to set the record time range.
5.2.2 Custom
Click “Custom” tab, and you can set a more specific record time range for the 3 record types:
Schedule, Motion, and Alarm.
How to add a new time setting
Step1: Check the record type you want to schedule the recording.
Step2: Set the start time (From) and end time (To).
Step3: Click “Add” to add the time range you just set into the schedule table. Before adding the time
range, you will be prompted to confirm as follow:
Step4: Check if the information shown is correct. Click “OK” if the information is correct. Click “Cancel”
if the information is wrong.
How to modify / delete a current time setting
Step1: Select the schedule setting you want to modify from the schedule table. The setting will be
displayed in the left panel.
Step2: To modify the setting, click “Update”; to delete the setting, click “Delete”.
Step3: If the setting is modified, you will be prompted to confirm the setting. Click “OK” if the information
is correct. Click “Cancel” if the information is wrong.
18