User manual

16
Button
Simplified Full Function
Function Description
E.T. E.T.
Event Trigger Check “E.T.” to enable event trigger recording
 Search
Search Click to enter the search panel for available device searching.
Add into address
book
Select one device from the available IP address list, and click this
button to add the selected address to the address book.
Setting
Select one device from the available IP address list, and click this
button to change the current IP configuration of the selected device
if needed.
Refresh Click to update the available IP address list.
4.2 Configuration Page for Device Access
This page should contain the correct information for accessing your device remotely.
Function Description
Apply / Login
Click “Apply” to save the setting and return to “Address Book” panel, or click “Login” to save the setting and
directly log into the device immediately.
Cancel
Click “Cancel” to discard the setting.
 General
Method
Select “TCP” or “UDP” based on your connection situation.
IP Address / Port / User
name / Password
Enter the IP address / port number / user name / password for accessing the device you want.
Get Type
Click “Get Type” for this software to identify the type of your device, and make sure the corresponding
functions available for the device will operate normally in this software.
Format / Resolution
Select the codec “MPEG4”, “JPEG”, “H264” or “Default” for streaming, and the resolution you need. The
available options may vary based on the device you want to access.
Note: This function is valid only for IP cameras.
Av Option
Select “Video/Audio” or “Video” to ensure whether the web audio transmission is needed.
 When your device supports web audio transmission but “Video” is selected, no audio is transmitted.
 When your device doesn’t support web audio transmission but “Video/Audio” is selected, no audio is transmitted.
Channel
Select “Multi-Channel” to see all video channels on your recorder, or “Single-Channel” to select only one
channel on your recorder.
Note: This function is valid only for recorders (DVR / NVR).
Comment
(Optional) Enter a description for this device.
 Advanced
Event Sound / Event
Sound Duration
Check “Event Sound” to enable the event alert sound, and it’s available to change the default alert sound.
Then, select how long the alert sound will last (3 ~ 60 seconds) in “Event Sound Duration”.