User Manual

N
e
w
P
r
o
d
u
c
t
i
n
f
o
November 2007
RGB Controller K8088
Technical:
• 256 intensity levels/ch.
• Voltage output: same as input voltage
• Current output possible (on-board resistor
needed)
• Suited for common anode RGB strips
• LED PWM freq: 82Hz
• Power supply: 10 - 15Vdc / 9A max.
• Dimensions: approx 80x70x23mm
Up-down level adjust for each output
Wide-range effect speed adjust
Hard transition effects
Runnning light, Strobo, Colour
loops, etc...
Smooth fade effects
Colour change, flame effect,
random colours, slow off etc...
3 x 3A
Hi power MOSFET outputs
Memory for last selected effect & speed
Easy up/down effect select
Suited for both incandescent
bulbs and LEDs
ON/OFF
10 -15
Vdc
IN
RGB OUT
3 x 3A
10 -15Vdc
Common +
EFFECT
PREVIEW
SELECT
RGB/EFFECT
LEVEL +/-
EFFECT SELECT
SPEED ADJ
Demo pictures using our LDB1-HS3027AC
RGB LED strip