Assembly instructions Manual

11
If you want to mount the reception indication LED at a distance (cf. fig. 2.0), do not mount LD16 directly on the
circuit board, but connect it to the board by means of a cable of the desired length.
USING SEVERAL RECEIVER INDICATIONS
In case you want for each receiver a diagnostic LED, connect them parallel and each LED in series with a resistor
(390Ω).
FIG 2.0
390
390
D
D
1
2
3
3
1
2
Anode
Cathode
1
2
3
12
3
SK11
Set-up