Datasheet

INSTRUCCIONES DE TRABAJO
Versión nº: 2 Fecha de revisión: Septiembre 2011
IDT-605: Fichas técnicas de producto
Velcro Europe, S.A.: Toda la documentación gestionada mediante el software “GESDOC” está sometida a un sistema de control de la documentación. Cualquier copia impresa debe ser considerada instantáneamente
obsoleta a excepción de la “copia controlada”. El contenido de este documento debe considerarse confidencial y de uso interno
One-Wrap
®
#29
Construction characteristiques
Basic construction
Base material
Extruded and laminated
Polypropylene & Velour PA
Width Nominal ± 1%
Overall thickness 1.35 ± 0.30 mm
Weight 550 ± 60 g/m²
Hooks/cm² (type#29) Average 272
Colours White, black, yellow, green, blue and red
Hook colours Natural. Except for black and white, where the
hook is black or white.
Usage characterístiques
Peel Strength* Minimum 0.4 N/cm
Shear Strength* Minimum 7.0 N/cm²
Cycle life * 50 % loss after 100 cycles
Breaking Strength * Minimum 120 N/cm
Melting Point 150ºC
Electric conductivity None
Washing resistance Good
U.V. resistance Low
Humidity resistance Medium
Sewn resistance Low
Acid resistance Medium
* Internal norm of VESA
The information included in this Technical Sheet is based on reliable tests and trials. Average value as a reference only, not a nominal specification. Given the
diversity of uses of our products we advise our customers to assure themselves that the product meets the requirements of their application. The responsibility
for the application and use of the product remains with the customer.
Elaborado:
J.C. Lima
Revisado:
E. Ducet
Autorizado:
J. Jacobs
Fecha: 17.10.11
ANEXO: IDT – 605-B FTP 601 Versión 2