User manual
61 62
Configuration
8.17.10
Mirror
Enable/disable image
mirroring.
•
Mirror: Select
Horizontal
to mirror the image horizontally, Vertical to
m
irror vertically, or
Picture Flip
to mirror both horizontally
and
vertically.
Select
Close
to disable image
mirroring.
8.17.11 Noise
Filter (solution may not feature this setting)
Configure noise filter settings.
•
Noise
Filter: Select
Auto
for automatic noise filtering or Manual.
•
Max Level:
Select the maximum level for automatic noise
filtering.
•
Level:
Select the level for manual noise
filtering.
9.
RESETTING TO FACTORY
DEFAULTS
Follow the steps below to revert all settings to factory defaults.
The
camera
must be connected
to
power
to perform a
factory
reset.
1.Loosen the three tamper
scr
e
ws
1
2
3
Reset
using the provided allen key. Lift the
dome
c
o
v
e
r
.
2.
Remove
camera
c
o
v
e
r
by
squeezing
the back and front of the
c
o
v
e
r
(as
indicated by the arrow indicators) at
the same time and lifting it up and
away
from the
l
e
ns.
3.Press and hold the black
r
e
set
button
for
5
seconds
then
r
e
l
ease
the
button to reset the camera to
f
a
ct
ory
def
aults.
4.Re-attach the camera cover, using
the thumb screw as a guide, until
it
snaps into place.