Ex Mark: II 2 GD Ex d IIC T6 Gb, Ta : -15°C to +60°C YHQ18 Explosionproof Camera Manual Book Ver: 0.
SVEX-Q18 Explosion proof Camera Manual Book Ver: 0.1 Please carefully read the Manual Book before your operation 1. Installation „ Please install under required environment „ Ensure stable and reliable mounting in case camera be damaged „ Ensure supply power same as nameplate marked before equipment being powered „ Do not open the pan/tilt and enclosure under humid atmosphere, otherwise video picture will be influenced because of enclosure good sealing, humidity could not go outside.
SVEX-Q18 Explosion proof Camera Manual Book Ver: 0.1 Most Suitable Position for Movement Choose the most suitable position when moving the equipment.
SVEX-Q18 Explosion proof Camera Manual Book Ver: 0.
YHQ18 Explosionproof Camera Manual Book Ver: 0.1 Tighten this screw after the cable is connected Tighten the top panel when camera setting is finished.
SVEX-Q18 Explosion proof Camera Manual Book Ver: 0.1 CONTEN T 1. BRIEF ................................................................................................................................................7 2. TECHNICAL .....................................................................................................................................7 2.1 Type Code ..............................................................................................................................7 2.
SVEX-Q18 Explosion proof Camera Manual Book Ver: 0.1 1. BRIEF This SVEXQ18 EXPLOSIONPROOF PAN TILT CAMERA（therefore as SVEX-Q18）as a new monitoring equipment adopts advanced production techniques and matured quality management system to make its quality, performance and appearance a leading position in explosion proof monitoring products. It can be used in flammable and explosive environment to realize monitoring purpose.
SVEX-Q18 Explosion proof Camera Manual Book Ver: 0.1 Ex Certificate Nemko 11ATEX1022 2.3 Electric Data Input voltage 110~240VAC, 50/60Hz Working current ≤500mA Power consumption ＜50W Communication RS-485 Communication speed multiple, could be set Communication protocol multiple, could be set Address code 256 Preset position 128 Preset Accuracy ≤0.1° Electric connection 6-core cable for control, Power and video 2.
SVEX-Q18 Explosion proof Camera Manual Book Ver: 0.1 Video output BNC joint / 1.0±0.2Vp-p / 75Ω 2.5 Mechanical Material Stainless 304 IP level IP67 Pan 0~360° continuously Tilt -90°~-+30° Pan speed 0.1°/S ~60°/S Tilt speed 0.1°/S ~60°/S Unit/ Ship weight 22Kg / 25Kg Mounting ceiling 2.6 Environmental Air pressure 86～106KPa Environment temperature -15℃~+50℃ Relative humidity U95%RH (+25℃) 2.7 Dimension P1.
SVEX-Q18 Explosion proof Camera Manual Book Ver: 0.1 2.8 Mounting Size P2. Camera bottom fix hole on diameter 216mm round 3. INSTALLATION 3.1 Caution Please carefully check before installation a. If there is ex-marking license b. The ex-marking satisfy environment use c. All ex-proof and flameproof parts are complete enough for structure d. Inside and outside earthlings are ready Stop immediately while there is any unconformity 3.2 Ceiling Mount Cable out Mount hole for fix Camera Glass P3.
SVEX-Q18 Explosion proof Camera Manual Book Ver: 0.1 P4. Tilt rotation angle 3.3 Cable Working 3.3.1 Ex Cable Use a. As P6, open the tighten screw on the base of camera, open ex cable screw joint for future use. Ex cable Gasket Screw Joint Cable outlet Gasket Cable out P5. b. As P6 firstly tight screw joint and then tight ex cable Cable outlet Ex cable P6. 3.3.2 Armored Cable Use a. as Picture 8, remove proper length cable protection cover and cut off not used part.
SVEX-Q18 Explosion proof Camera Manual Book Ver: 0.1 Ex-proof Gland Parts Armored cable Protection Cover Steel belt Cable inner layer Cable core wire Rubber Sealing Loop Nut Bushing Gasket Bushing Joint Taper Volt P7. b. as Picture 8, install Ex-proof Gland to Armored Cable Armored cable Out Finished Gland Cable Inner Layer Screw Thread P8. c. armored cable with ex gland could be connected with any ex equipment‟s.
SVEX-Q18 Explosion proof Camera Manual Book Ver: 0.1 4. CONNECTION, SETTING & APPLICATION 4.1 System Diagram 4.1.1 Connecting Diagram P9 Video signals can be connected with different equipment, such as LCD monitors, DVRs, video server or matrix. The signals can be also distributed or gained by video distributors as well. All equipment‟s can control the camera with suitable communication way and protocols.
Function Color Live wire Neutral wire Earth wire RS485-A Brown Grey Yellow/Green Red SVEX-Q18 Explosion proof Camera Manual Book Ver: 0.1 RS485-B Standard Video Cable Blue 4.1.3 Power and Video Cable Connection A junction box shall be used with SVEX-Q18 as Picture, and refer to Table 1 to connect cable of power and video inside Junction Box. Remember to use ex cable for power cable out of Junction Box. 4.1.
SVEX-Q18 Explosion proof Camera Manual Book Ver: 0.1 4.2 Setting 4.2.1 Set Method To set address and baud rate here in camera Pay attention of the F.P P12. Set Method After opening the left side panel, the dip switch can be seen. The customer needs to set the protocol, address and baud rate. See the below chapter for reference. When power is on, the camera version, protocol, baud rate and address of current camera are shown. VERSION：1.
SVEX-Q18 Explosion proof Camera Manual Book Ver: 0.1 4.2.2 Camera Address Set Decimal system is used for camera address, K1、K2、K3 dip switches are for address setting. K1 stands for the unit digit, K2 is for tens digit and K3 for hundreds digit. Other K4 is for baud rate and K5 for control protocol. e.g if the camera address is No.2, the K1 needs be 1 and K2, K3 should be 0, see below table: Dip Switch K3 K2 K1 Address 0 0 2 If the camera address is No.
SVEX-Q18 Explosion proof Camera Manual Book Ver: 0.1 4.2.5 Remote Control Setting When K4 is “0”, camera address, control protocol and baud rate can be set with OSD Menu (the default baud rate is shown on the display when power is on). At this time, the setting of K1, K2, K3 and K5 won‟t work. Setting process is as below: Go to preset 95, press MAIN MENU CONTROL RS485. 5. OSD MENU FUNCTION OSD MENU is available for this camera. You can enter OSD like this: when camera power is on, go to No.
SVEX-Q18 Explosion proof Camera Manual Book Ver: 0.1 F.P F.P F.P P14. Flameproof point location 7. TROUBLE SHOOTING Table 4.
SVEX-Q18 Explosion proof Camera Manual Book Ver: 0.1 9. QUALITY GUARANTEE For any camera produced by Veilux, we promise half-year to change and one year to repair. During Guarantee period, we supply free service except following situations: z z z User does not operate as manual book requires User un-install the whole product by themselves Lightning or Act of God If there are additional agreements between Veilux and buyer, then agreements shall be strictly done 10.
