Instructions / Assembly

B-1
X1
B-2 X1
B-2
B-1
L 1
L2
Before connect parts "B-1" and parts "B-2", please measurement the length of "L" and check
nuts on the tube is tighten or not.
The length on "B-1" and "B-2" should be change the distance as request before usage.
Please adjust the length by yourself.
L1=450mm
After adjusting the distance, tighten all the screw nuts
4
Attention:
Do not remove the bindings holding the two extension arms until fully assembled. These are
spring-loaded and can cause serious injury if allowed to spring free.
L2=400mm