PG0202-02 customerservice@ veikous.
Pg.
Pg.
3
Attach post top cap (A) to post (1 & 2) Attach and fasten stake piece (U) to the end of post (3) by bolt (P1) and cap (R) Insert post connector (J) into post (3) by bolt (P1) and bolt cap (R) Attach decorative circle (K) to post (3), and attach post (1 & 2) to post (3) by bolt (P1) and bolt cap (R) Connect two middle cross beams (C) with inside connector (N1) by bolt (P3) & nut (Q) & nut cap(O) & bolt cap (R) to make sure that there is no gap between the two middle cross beams (C) by tighting the bolts
Attach triangle cap (G) to assembled middle cross beam (C) Assemble six side glidewheels (M) into side cross beam (E), and then connect side cross beam 1 (E) & side cross beam 2 (E1) with inside connector (N1) by bolt (P3) & nut (Q) & nut cap(O) & bolt cap (R) to make sue there is no gap between the two tubes by tighting the bolt Attach triangle cap (G) to side cross beam 1 & 2 (E & E1) Connect bottom cross beam 1 (D) and bottom cross beam 2 (D1) & beam3(D2) with inside connector (N) by bolt (P4) & nut (Q
Attach triangle cap (G) to assembled enhanced support beam (F) Connect assembled side cross beam ( E1) and assembled bottom cross beam 2 (D1) to assemled post (2) by big bolt (P2) Follow the same step as 14 to connect other three left Pg.
Attach assemled middle cross beam (C) to assembled bottom cross beam (D & D1 & D2) by bolt (P5) & bolt cap (R). Attach assembled enhanced support beam (F) to assembled bottom cross beam (D & D1) by bolt (P5) Insert fabric rib 1 (L) into fabric rib 2 (L1), and then through assembled fabric rib 1 (L) into fabric cover (W), and through assembled fabric rib1 (L) into the hole of glidewheel (Y&B)which on assembled middle cross beam (C) Pg.
Connect assembled fabric rib 2 (L1) to the hole of glidewheel (M) which on assembled side cross beam (E) by bolt (P1) & bolt cap (R) Attach gripping magnet steel piece (V) into assembled bottom cross beam 3 (D2) by bolt (P1) & bolt cap (R) Connect drawstring of drawstring glidewheel with magnet (B) to gripping magnet steel piece (V). Fix assembled pergola on the ground with ground stakes (T) if needed. Pg.
