Instruction Manual

34 VEGACOM 557 VEGA ASCII
4.5 Enquiry as range with low resolution
Low resolution = switch 2.2 = OFF
This telegram reads in a DCS value from VEGACOM 557. Depending on the position of the
switch 2.1, the DCS values are arranged differently. The assignment of the DCS numbers to
the VEGAMET addresses is stated in supplement A.
Answer of VEGACOM 557
Start character: S1 = 1 character "=“
Start character: S2 = 1 character "#“
Total length of the telegram: 12 or 13 characters
Telegram from processing system to VEGACOM 557
n (n= stated number) repetitions
123456
3 positions in front of the decimal point
1 decimal point
1 position after the decimal point
"-“ with negative values
" " with positive values
valid measured value
12345
‘FAULT’
Fault
Identifier: 1 character, "%“
T1 : Separating character = 1 character "L“
End identification: 1 character Chr (13) = CR = Carriage Return
Total length of the telegram: 9 characters
Data image in VEGACOM 557
DCS DCS End
S1 no. S2 value2 identification
No. of bytes 1 3 1 5-6 2
Range (ASCII) = 001..255 #
DCS value or
fault %CR
Example = 001 # -067.3 %CR
DCS End
Identifier number T1 Number identification
No. of bytes 1 3 1 3 1
Range (ASCII) % 001..255 L 001..255 CR
Example % 001 L 001 CR