User Manual

VEGACOM 557 Siemens 21
Setup
Select with F7 in the field program name the programming library COMLIB02. For interpreter
selection push F3:
-> PROGRAM CHOICE -> CHOICE-> TRANSMIT –> SIMATIC S5 / COM 525
P R O C E D U R E
—————————————————————————————————————
Source: Destination:
VOLUME: FD FD
DRIVE: C C
INTERFACE NO.:
PROGRAM NAME: COMLIB02 PROGR1
COMPONENT: RK
Source: COMPONENT NAME VERSION
RK RK512 01
F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8
TRANS- | | | | | | |
MIT | | | | | | HELP | EXIT
Issue short description
To check the settings, a short description can be issued.
Change to the overview menu: Basic pattern F1 -> Selection F4 -> Information F3 -> FD F2 ->
Short description. The menu appears:
-> PROGRAM CHOICE -> CHOICE-> SIMATIC S5 / COM 525
INFO
—————————————————————————————————————
VOLUME: FD
DRIVE: C
PROGRAM NAME: PROGR1
COMPONENT: RK
System name: system
Creator: tgr
Creation date: 03.11.94
Data type Element name Number Data type Number
Interpreter: RK512 01 1 Order block 1
Procedure: P3964R 01 1
Print param: DRUCK_PARA
Total number: 3 elements
Program length: 9321 words
F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8
SHORT | | | | ORDER | | |
DESCR. | | | | BLOCK | | HELP | EXIT
The interpreter must be set to RK512 and the procedure to P3964R.
Save programm in EPROM
The program is transferred with an EPROM programming device (PROMMER) to the EPROM
memory module for the CP. For this, you have the program PROM 525. It is called up in the S5
program in directory Change/further... (directory: \STEP 5).